Skip to main content
ASK OUR EXPERTS
1-866-464-6553

B&M Holeshot 3800 Torque Converter, 1970-82 Ford C4

1.375-inch crank pilot. 26-spline input. 11.4-inch bolt circle. 3400-3800 RPM stall

Part # 50454 Be the first to write a review

B&M Holeshot 3800 Torque Converter, 1970-82 Ford C4

In Stock
Free Shipping - Lower 48 US States
$573.95
Add to Wishlist
Starting at $51 a month with Learn More
5

Emissions

This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.

See Emissions Details
This HoleShot 3800 fits 1970-82 Ford C4 automatic transmissions with 26 spline input,1.375-inch crank pilot and 11.4-inch bolt circle. Holeshot torque converters are for serious-minded performance enthusiasts and offer additional strength and durability features not found in our Tork Master or Traveler series of converters. The Holeshot 3800 converter is good for vehicles with some performance engine modifications, particularly big cams that tend to reduce low-end power and torque. The higher stall speed of this converter will launch the car in a higher rpm range where more torque is readily available, resulting in quicker acceleration. Holeshot converters feature furnace brazed impeller fins and turbine, new precision alloy impeller hub and new heavy duty needle bearings. Other features include fully balanced and pressure tested by expert technicians. If your vehicle is equipped with a plate type nitrous system or supercharger, please refer to the Nitrous Holeshot line of converters. Notes: Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Higher stall converters can generate more heat, so we highly recommend adding a transmission cooler. This converter is Not recommended for supercharged, plate-type nitrous oxide or trans-brake applications. The product images shown are for illustration purposes only and may not be an exact representation of the product.

Features:

  • Precision Balanced on Certified Balance Equipment
  • Copper Furnace Brazed Impeller and Turbine
  • New Precision Alloy Steel Impeller Hub
  • Race Proven Technology & Quality

About B&M

Shop B&M's official site for automatic shifters, transmissions and components that exceed all your performance enthusiast needs at Holley.com!

Anti-Balloon PlateNo
Automotive Item GradeHigh Performance
Brand B&M
Crank Pilot Diameter (in)11-7/16"
Emission Code5
FlexPlate Bolt CircleHoleshot
Input Spline26
Lockup TypeNo
Mounting StudsYes
Product TypeAutomatic Transmission Torque Converter
Stall3400-3800
Stall Speed3,400-3,800
Torque Converter Series1.38
TransmissionC4
Transmission ModelC-4
UPC019695952990
California Proposition 65 RequiredNo
Part Number50454
5

This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.
  • Torque Converter
  • Mounting Hardware
Fits vehicles with 1970-82 Ford C4 automatic transmissions with 26-spline input and 1.375-inch crank pilot.
Reviews

    Your Review

    *Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.