Skip to main content
ASK OUR EXPERTS
1-866-464-6553

Torque Converter, Holeshot 3000

Torque Converter

Part # 40442FM Be the first to write a review

Torque Converter, Holeshot 3000

Not Available

1

Emissions

This part is legal for sale and use on Emissions Controlled Vehicles, in all 50 states, when used in accordance with the manufacturers application guide because it has a California Air Resources Board (CARB) Executive Order (EO) number.

See Emissions Details
A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator Anti-balloon plate.

Features:

  • New turbine hub
  • Heavy Duty Needle Bearing
  • Steel alloy pump Drive tube
  • Furnace Brazed Impeller

About B&M

Shop B&M's official site for automatic shifters, transmissions and components that exceed all your performance enthusiast needs at Holley.com!

Additional ContentsNew needle bearings
Automotive Item GradeHigh Performance
Bolt Circle Diameter (in)11.4
Brand B&M
Emission Code1
Flexplate Change NeededNo
Furnace BrazedNo
MaterialSteel
Stall Torque Ratio2800 to 3200 RPM stall
UPC019695404420
Part Number40442FM
1

This part is legal for sale and use on Emissions Controlled Vehicles, in all 50 states, when used in accordance with the manufacturers application guide because it has a California Air Resources Board (CARB) Executive Order (EO) number.

The following vehicles are considered Emissions Controlled Vehicles:

  • 1966 and newer U.S. manufactured California Certified vehicles
  • 1968 and newer U.S. manufactured Federally Certified vehicles
  • 1968 and newer Foreign manufactured vehicle
Fits Ford 1971 to 1991 C6 automatic transmission with a 289, 302, 351C, 351M, 351W, 400M, 460 CID engine using a 1.375 inch crank pilot
Reviews

    Your Review

    *Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.