BM 10231 Flexplate, 8 Bolt Crank, for Torqueflite A727 or A904, 1962 and later, Internal Balance

SKU: 10231
Fits 1962 and newer Chrysler, Dodge, Plymouth Torqueflite A727 and A904 automatic transmissions. Bolts onto 8 bolt internally balanced crankshaft with a 10 inch bolt pattern.
Price: $107.34
IN STOCK
QTY:
FREE 3-Day Shipping (Details)

Shipping is free via UPS Ground or 3-Day Select for orders of $25 or more (excludes transmissions). If the transit time using UPS Ground Shipping will exceed 3 days to your location, we will upgrade the shipping service to UPS 3-Day Select, at no cost to you.

Free shipping is available within the continental U.S. only. Shipping charges will apply to all other destinations.

Verify This Part Fits Your Vehicle
Features

This Chrysler flexplate has a 10 in. bolt pattern and is SFI 29.1 approved(recertification required every 3 yrs.). Fits 1962 and later Dodge, Chrysler and Plymouth's with a Torqueflite A727 or A904 automatic transmission and has an 8 bolt hole pattern. Works with internally balanced crankshafts. NHRAIHRA legal for all classes and is ideal for street applications to extreme duty racing and high RPM (use above 6,000 RPM). B&M's new Radial Tension Technology puts a new spin on flexplate technology. As engine performance levels increase, stronger flexplates become necessary. Until this point, stronger flexplates meant thicker flexplates. This works, but it adds unwanted weight and prohibited the flexplates from working as it was designed. Flexplates are designed to provide a protection against converter and transmission run out or OEM misalignment, which will cause transmission andor converter failure. A rigid flexplate gives no protection. The ultimate design for a flexplate is extreme strength, flexibility and minimal weight. B&M's new RTT performance flexplate accomplishes this goal. B&M's design allows for the removal of unnecessary material from non-critical stress areas. Less material means less weight giving you the benefits of a lightweight, flexible design with thicker material for maximum strength!

  • To Extreme Duty Racing
  • Ideal For Street Applications
  • Includes SFI Certification Sticker
  • NHRA and IHRA Legal For All Classes
PRODUCT SPECS
Dual PatternNoRing GearNo
IHRA LegalYesNHRA LegalYes
SFI ApprovedYesOutside Diameter (in)10.84
Weight (lb)3.50Crankshift Bolt Hole Count8
SFI Certification StickerIncludedBalanceInternal
 California Proposition 65 Information

WARNING: This product can expose you to chemicals including Cadmium and cadmium compounds which are known to the State of California to cause cancer and birth defects, or other reproductive harm (For more information go to www.p65warnings.ca.gov)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

x
Search by Vehicle