INSTALLATION ACCESSORIES
Flowmaster's line of installation accessories are designed for the professional installer. These accessories are designed to work with Flowmaster mufflers in custom installations to allow for a high quality installation and years of reliable service. |
Four Piece Universal Tailpipe Kit
Designed for use on 90% of all trucks, vans and SUVs. Incorporates
12 feet of aluminized mandrel bent tubing with deep slip fit connections. Aligns
for left, right or rear exit style routing |
|
|
Universal Scavenger Pipe Kits
Our Universal Scavenger Pipe Kits can produce significant torque improvement. It's patented D-port™ technology functions exceptionally well on modified GM, Ford, and Mopar "Muscle Car" applications while maintaining the classic Flowmaster sound. |
|
|
Turbo Diesel Down Pipe Kit
Designed for use with Ford F-Series and Chevrolet diesel trucks. Increases air folow 25-percent, easy installation wiht two pipes. Kit inclueds head shield, ball flange connector and clamps. |
| PART# |
TUBE DIAMETER |
| 1029 |
94-98 Ford 7.3L 3.00"
More Info |
| 17220 |
95-98 Chevy 6.5L 3.00"
More Info |
|
|
Universal Balance Pipe Kit
Flowmaster offers a pre-fabricated Universal Balance
Pipe Kit to ease the installation of a crossover pipe in a dual exhaust system. Kit
includes T-pipe connectors, balance pipe, and clamps. |
|
|
|
S-Bends (6 per pack)
A mandrel bent, S-shape pipe, developed to simplify
the routing and fabrication of exhaust pipes from headers to muffler. Deep slip fit
on single end of pipe.
|
|
|
Mandrel Bends
 |
|
|
Universal Intermediate Pipe Kit (6 per pack)
Kit includes a combination of S-bend pipes in
pairs of 4", 6" and 8" offsets to allow the skilled DIY to fabricate
the intermediate pipes of a dual exhaust system. |
| PART# |
TUBING SIZE |
| 15926 |
2.50" pipe diameter kit
More Info |
| 15927 |
3.00" pipe diameter kit
More Info |
| 15928 |
3.50" pipe diameter kit
More Info |
|
|
H-Pipe Ends (10 per pack)
Developed to easily fabricate an H-pipe in a dual
exhaust style system. These ends are "fished mouthed" to fit tightly against the
side pipes and slip-fitted to easily create the cross-over or "H-pipe." |
| PART# |
DESCRIPTION |
| 15913 |
2.00" size to fit 2.00" - 2.50" Dual Systems
More Info |
| 15915 |
2.50" size to fit 2.50" - 3.50" Dual Systems
More Info |
|
|
Header Collector Ball Flange Kit
(Sold in pairs)
This header collector kit takes the place of messy
three bolt flange type connections and allows for a leak free and gasket free ball
flange type connection. |
| PART# |
DESCRIPTION |
| 15922 |
3.50" collector to 2.50" system
More Info |
| 15923 |
3.50" collector to 3.00" system
More Info |
| 15924 |
3.00" collector to 2.25" system
More Info |
| 15925 |
3.00" collector to 2.50" system
More Info |
| 15930 |
3.00" collector to 3.00 " system More Info |
|
|
Venturi Reducer Cones
(Sold in pairs)
Form a smooth transition from one pipe diameter
size to another. 8" in length. |
|
|
Heat Shields
Formed aluminum heat shield designed to mount
on muffler for added protection in reducing heat radiated from mufflers and reducing
interior noise. Attaches easily with included straps. |
| PART# |
DESCRIPTION |
| 51017 |
Fits 50 Series[tm] SUV-Performance[tm] Muffler
More Info |
| 51017-10 |
Fits 50 Series[tm] SUV-Performance Muffler[tm] (10-pack)*
More Info |
| 51022 |
Fits 70 Series[tm] Big Block® II Muffler
More Info |
| 51022-10 |
Fits 70 Series[tm] Big Block® II Muffler (10-pack)
More Info |
| 51222 |
Fits 50 Series[tm] Big Block® II Muffler
More Info |
| 51222-10 |
Fits 50 Series[tm] Big Block® II Muffler (10 pack)
More Info |
| *Does not include straps |
|
|
Premium Ring Clamps
Available in 2.00", 2.25", 2.50", 3.00", 3.50" and 4.00" diameters. These zinc-plated clamps can handle lots of torque and tighten up with the twist of a single 0.375", quick-to-tighten, large thread bolt. |
| PART# |
DESCRIPTION |
| 15945 |
2.00" ID, zinc-plated, 10-Pack
More Info |
| 15946 |
2.25" ID, zinc-plated, 10-Pack More Info |
| 15947 |
2.50" ID, zinc-plated, 10-Pack More Info |
| 15948 |
3.00" ID, zinc-plated, 10-Pack More Info |
| 15949 |
3.50" ID, zinc-plated, 10-Pack More Info |
| 15950 |
4.00" ID, zinc-plated, 10-Pack More Info |
|
|
Tailpipe Heat Shield (Sold individually)
Pre-bent aluminum heat shield designed to
reduce heat radiated from tailpipes which are routed close to gas tanks or flooring
on RV or van conversion type vehicles. Individual heat shields include clamps. |
|
|
Universal Inline Resonator
 Tuned
resonator designed to be used in conjunction with Flowmaster mufflers for improved
sound reduction. Helps eliminate interior resonance. Utilizes a 3.00" offset
inlet/3.00" offset outlet design, measuring 4" thick x 8" wide x 12"
case length. |
| PART# |
DESCRIPTION |
| 15110 |
3.00" Inlet/Outlet Resonator
More Info |
| 15126 |
3.50" Inlet/Outlet Resonator More Info |
| 15131 |
3.00" Inlet/Outlet Resonator w/ Pipe More Info |
|
|
Brushed Stainless Turn-Down Angle Cut Exhaust Tip (Sold
individually)
 This stainless tip is available to accent an exhaust system
by offering a slight turndown design with an angle cut exit. |
| PART# |
DESCRIPTION |
| 15341 |
Angle cut turndown 3.00" tip designed for 2.50" pipe (11"
length)
More Info |
| 15342 |
Angle cut turndown 2.50" tip designed for 2.25" pipe (9"
length)
More Info |
|
|
Brushed Stainless Rear Side Exit
(Sold in pairs)
 Stainless tip available to accent an exhaust system routed
for a rear side exit by offering a polished angle cut designed exit. |
| PART# |
DESCRIPTION |
| 15352 |
Angle cut rear side exit 2.50." Designed for 2.50" pipe
(16" length)
More Info |
|
|
Brushed Stainless Angle Cut Rear Exit Exhaust Tips (Sold
in pairs)
 Stainless
tip that is available to accent an exhaust system routed for a rear bumper exit by
offering a polished angle cut designed exit. |
| PART# |
DESCRIPTION |
| 15351 |
Angle cut rear exit 2.50" Tip designed for 2.50" pipe (24"
length)
More Info |
|
|
Polished Stainless DTM-Style Turn-Up Angle Cut Tip (Sold
individually)
 This
polished stainless tip is available to accent a rear exit exhaust system by offering
a European appearance with a slight turn-up design offering a 3.00" angle cut
exit. |
| PART# |
DESCRIPTION |
| 15331 |
3.00" Polished Tip to fit 2.25" (8" length)
More Info |
|
|
Polished Stainless C-5 Corvette Tips
 This
exhaust tip is the same polished stainless design utilized on the 1997-2001 C-5 mufflers
offered by Flowmaster. Sold as matched pair (2 pieces equal one matched tip) |
| PART# |
DESCRIPTION |
| 15302 |
5.00" split oval design for 2.00" pipe diameter (6.75"
length)
More Info |
|
|
Stainless Steel Rolled Edge Exhaust Tip
 Single wall, angle cut rolled edge exhaust tip, Offered in
3.00" - 5.00" exit diameter and designed to fit 2.00" - 4.00" pipe. (Sold Individually) Comes finished with embossed Flowmaster logo. |
| PART# |
DESCRIPTION |
| 15360 |
3.00" diameter Angle Cut for 2.00" pipe (6" length)
More Info |
| 15366 |
4.00" diameter Angle Cut for 3.50" pipe (10" length)
More Info |
| 15367 |
5.00" diameter Angle Cut for 4.00" pipe (10" length)
More Info |
|
|
Stainless Steel Double Wall Exhaust Tip
Stainless exhaust tip that is designed with a double-wall,
rolled edge offering a 3.50" and 4.00" diameter exits. Designed
to fit onto 2.50" pipe. (Sold Individually) Comes finished with
embossed Flowmaster logo.
|
| PART# |
DESCRIPTION |
| 15364 |
3.00" diameter Double Wall Rolled
More Info |
| 15365 |
4.00" diameter Double Wall Rolled
More Info |
|
|
Stainless Steel Rolled Edge Exhaust Tip
Stainless exhaust tip that is designed with a
rolled edge offering a 3.00" diameter exit. Designed
to fit onto 2.50" pipe. (Sold Individually) Comes finished with embossed Flowmaster logo. |
| PART# |
DESCRIPTION |
| 15361 |
3.00" diameter Rolled Edge for 2.50" pipe (12" length)
More Info |
|
|
Stainless Angle Cut Exhaust Tip
Exhaust tip with non-rolled angle cut end. Offered in
3.00" exit diameter and designed to fit 2.50" pipe. (Sold
Individually) Comes finished with embossed Flowmaster logo.
|
| PART# |
DESCRIPTION |
| 15362 |
3.00" diameter Angle Cut for 2.50" pipe (13" length)
More Info |
|
|
Stainless Steel Exhaust Tip
This Stainless tip is a 12 inch long tip designed to slip fit over
a 3.00" pipe to offer a 3.50" outlet diameter tip. Style is a
highly polished round tip iwth a rolled edge and embossed Flowmaster logo.
(Sold Individually)
|
| PART# |
DESCRIPTION |
| 15363 |
3.50" diameter Angle Cut to fit 3.00" Tubing More Info |
|
| |
|
|
